yellowchair wood greyer 1 liter for exterior paints

- for outside
- simple application highly effective
- very productive

Suitable for: refreshing and cleaning gray wood outdoors. The natural color of the wood becomes visible again after using the special cleaner. The subsequent coat of paint, for example with yellowchair EXTERIOR PAINT for wood, permanently protects the wood against graying and preserves the natural color tone.

Application/Processing:
Processing temperature (incl. drying) above +8 °C. Do not use in rain or expected rain.

After using the wood greyer, allow the wood to dry for at least 24 hours. Pre-treat softwoods with eg yellowchair impregnation primer to avoid the risk of fungus. Then finish with suitable exterior paints.

Proceed in sections for large areas.

Depending on the degree of soiling or graying, apply wood greyer undiluted or diluted with water at most 1:5 to the pre-wetted wood and brush into the wood with a brush in the direction of the grain. After approx. 15 minutes, brush off the loosened graying with a brush and water until the desired color is achieved. If necessary, repeat the process. Then wash well with clear water.

Consumption: 50 - 100 ml/m², ie 1 liter of wood greyer is sufficient for approx. 10 - 50 m² (depending on how dirty it is).

Cleaning: Clean the brush and painting tool with warm water and soap immediately after use.

Storage: cool but frost-free.

Ingredients: water, oxalic acid, < 5% non-ionic surfactants.

Important notes: Causes serious eye damage. Safety data sheet available on request. If medical advice is needed, have product container or label at hand. Keep out of the reach of children. Read all instructions carefully and follow them. Wear protective gloves and eye/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if possible. Continue rinsing. Immediately call a POISON CENTER or physician. Do not fill into containers intended for food. Keep away from food, drink and animal feedingstuffs. Do not empty into drains. Dispose of contents/container in accordance with local/regional/national/international regulations. UFI: M1V2-10HX-500V-TFMK. ASN No.: 070601.